I just purchased an 32LG30 and want to use a flat wall mount. I purchased three different wall mounts and believe it or not, none of them came with "written" instructions, just pictures indicating the instructions. The problem I have is with the screws that go into the back of the the TV. I know that the proper type is M4, but each of the wall mounts came with three different lengths of M4's, as well as "plastic spacers". How do I determine which length screw to us in order to not damage the TV.

.....there wouldn't be this problem if the instructions were written instead of those "universal pictures" that so many companies are now using.

Thanks in advance for your help.

Hi

Screw the bolts in with your fingers and wait until the screw stops in the TV. You won't damage the TV just screwing them finger-tight and there's no way a screw will end up hitting anything electrical in the TV. If the screw stops before it is tight against the TV then it is too long and you may need to use a spacer. To make sure it is long enough make sure there's at least 7mm (about 18 turns on M4) into the TV.

Hope this helps.

Very true